Das-audio Aero 48 Manual do Utilizador

Aero-48 MANUAL DEL USUARIO / USER’S GUIDE

Once the first box is attached to thestructure, the remaining boxes should be brought tothe array and attached repeating the previous steps (1and 2) u

Aero-48 Manual del usuario/ User´s manual 38

While the array assembly descends, therear of the enclosures will come together, at thatmoment, the safety pins which hold the G2A48guides in place sh

Once the two PL-48S_2 have been attachedto the boxes (3) using one safety pin per piece, the PL-48S_1 pieces can be attached. Remove the safetypins (4

Boxes 3-4 should be separated at the frontby removing the safety pins (10) that secure theG1A48guides.101211The first group of boxes has now been free

Continue lowering the systems and secure(16) the PL-48S_1 pieces to the front rigging points ofbox3, inserting2 safetypins ineach (17).The next step i

The arrangement in the following picture isan unstable one. The smaller the splay angle betweencabinets, the more the stability. Obviously, the mostre

Both PL-48S_1 pieces must now beattached (5) to the box on the bottom by means of twosafetypins oneach side.43After having rolled a PL-48S platform un

When the boxes are flown the safety pinsmust be inserted in the G2A48 slots. Now we want tostack the boxes, so the next step is to release the pinsfro

The cluster must now be lowered (10) untilthe safety pins (11) on the rear side of box number 4can be removed. Once safety pins have been releasedthe

Precauciones de Seguridad Safety PrecautionsEl signo de exclamación dentro de un triángulo indica la existencia de importantes instrucciones de ope

At this point the boxes are safely stacked.Finally, the AX-AERO48 grid should be detached fromboxnumber 1.1.6º4.8º3.2º2324In order to set up the angle

AERO-48 boxes can be easily transported ingroups of three when stacked on the PL-48S platform.This arrangement is also useful and saves time whensetti

Select the angle between cabinetsintroducing (5) the pins in the holes of the riggingsystemthrough theslot ofG2A48.0.8º1.6º553344The angles that can b

Place the remaining group of boxes underthecluster, then lower the cluster until bothfront sidesget in close proximity. G1A48 front guides (9) of thef

With the front guides correctly secured,swing the G2A48 (11) rear guides belonging to thebox on top of the second group and lower the grid tillthe gui

4. SIGNAL PROCESSINGAmplifierData:V=P*ZV/SV= P *ZLimitlevel (v)=V /GLimitlevel (dBu)=20log[limitlevel (v)/0.775]Where P is the maximum power to bedeli

DSP-3VSLINE INaero-48aero-485. SYSTEM CONNECTIONCONFIGURATION 1 (3 WAY STEREO SYSTEM FOR MID-LARGE SIZED VENUES)2 x 1200W@4ohm2 x 1200W@4ohm2 x 1200W@

DSP-3VSDSP-1SubLINE INELECTRONICS®ELECTRONICS®a SUBero-218aero-218SUBaero-48aero-482 x 1400W@4ohm±1LF ±1LFCH-A CH-BRECOMMENDED AMPLIFIERSCONNECTIONSCO

55Aero-48 Manual del usuario/ User´s manual6.OPERATING PARAMETERSOne of the most important parts of a multi-way sound reinforcement system is the digi

PINS 4± 4 x M-10N4 x M-10N8 x 8MN8 x 8MN8 W8 W4 W4 W4 W4 W4 W4 W600 W600 W1000 W1000 W1000 W1000 W1000 W1000 W600 W / 8 W600 W / 8 W1000 W / 4 W1000 W

1. SYSTEM DESCRIPTIONThe D.A.S. Audio AERO series offers twounits for applications requiring precise control of thevertical coverage and high sound pr

SOUND PRODUCTS®AERO-48seriesINTRODUCTIONThe AERO-48 is an externally powered,high efficiency line array module which integrateslow, mid and high frequ

AERO-218SUBseriesINTRODUCTIONThe AERO-218SUB is a high efficiency,arrayable subwoofer unit designed to provide lowfrequency reinforcement for the AERO

US/AERO-01D.A.S AUDIO, S.A. C/. Islas Baleares, 24 - 46988 Fuente del Jarro - Valencia, SPAIN Tel. 96 134 0525 - Tel. Intl. +34 96 134 0860 Fax. 96 1

2. RIGGING SYSTEM2.1WARNINGThismanual containsneeded information forflying DAS Audio line array systems, description ofthe elements and safety precaut

STACKFLYFor flying boxes and defining the splayangle, the pins must be inserted in the slot of guide 2,G2A48, whereas for stacking ( ), the pin goesth

2.3 SAFETY FACTORSbreaking load limit and themaximum safe working load limit (SWLL). In thiscase, the breaking load limit of each of the flyingpoints

3. ASSEMBLING AN ARRAY3.1TRANSPORTING THE CABINETSAERO-48 units can be transported by usingthe front panel dolly PL-48 or by using the PL-48Ssteeldoll

Lifted by way of the rear hoistuntil the wheels of the PL-48dolly platform are off the ground.Once the first box has been placed at 0º andraised appro

Lift the box and introduce theG1A48 guides securing themwith the safety pins.Once the boxes have been joined, the frontdolly panels can be removed. Th